Ready to review

Flat pack furniture on moving day: take it apart or move it whole?

A half dismantled pale wood wardrobe in a bedroom, panels against the wall and a bag of screws ready for moving day.

Our guide explains which flat pack furniture to take apart before moving and which pieces to move whole, so you can plan for moving flat pack furniture safely.

Most flat pack furniture is designed to be assembled once. Cam locks, dowels and screws fitted into chipboard or MDF can loosen or strip each time the furniture comes apart. Moving larger pieces whole can also put strain on long panels, especially when a wardrobe has to be tilted through a doorway or around the stairs.

Moving flat pack furniture whole works for small, sturdy pieces

Small, solid pieces can often travel assembled. Bedside tables and small chests of drawers are usually suitable, once every drawer has been emptied. Removing the contents cuts the weight and stops loose items shifting during the move.

Bookcases can also stay together when the frame feels firm. Take out any removable shelves first and pack them separately, so they cannot slide or press on the sides. TV units may travel whole as well, provided the fittings are tight and the unit is not flexing.

Access matters as much as condition. Each piece needs to fit through the doorways and around any turns on the stairs. A removals survey lets us check the furniture, the volume of goods and the route out of the property before moving day.

Wrapping protects the surfaces and corners during handling. Two people should carry the heavier pieces and keep them upright. Tilting flat pack furniture can strain its joints, especially where screws, dowels or cam locks sit in chipboard or MDF.

When a piece has to come apart

Large wardrobes, beds and big corner units often need dismantling before we can move them. The same applies to anything that will not fit through a doorway or round a turn in the stairs.

The survey shows us those problems in advance. We look at the size of the furniture, the route out and the access at the new home, which is the same planning we describe in our guide to moving heavy furniture safely.

Tall wardrobes are especially vulnerable when moved whole. Long panels made from chipboard or MDF are weakest when the wardrobe is tilted, and the cam locks, dowels and screws can loosen under the strain. Beds need their mattresses removed first, and most bed frames travel better in pieces.

How to take flat pack apart so it goes back together

Start by finding the instructions, if you still have them. Keep them with the furniture during the move.

Photograph the furniture before you begin. Take another photo at each stage, including close shots of the fittings and where each panel joins. Those pictures help when the instructions are missing or unclear.

Mark every panel as you remove it. Use labels that show the item and the panel position, such as wardrobe left side or bed head end. Avoid writing directly on a visible surface.

Keep fittings from different items separate. Put the screws, dowels and cam locks into a labelled bag for each item, then tape the bag firmly to the largest panel, away from finished edges.

Work carefully around chipboard and MDF. Pull panels apart in the direction they were fitted rather than forcing the joints. When rebuilding, line up every panel before tightening the fittings, and tighten only until the joint feels secure. Overtightening damages the board and leaves the fitting with less grip.

Agree the dismantling with us before moving day

Under our terms, we only dismantle or reassemble furniture when the work has been agreed with us in writing beforehand. Tell us about any large beds, sofas or flat pack furniture at the survey or quote stage, so we can allow for the work in the moving plan.

Our team can take a large bed apart, move it and rebuild it at the new home. We can also remove and refit sofa legs. Flat pack assembly is available as its own service, and we can collect new flat pack furniture from a collection point, such as Ikea, on the way to your new home and build it there.

Flat pack moving day checklist

  • Tell us about any dismantling or assembly at the survey or quote stage.
  • Agree the work with us in writing before moving day.
  • Empty every drawer and cabinet to reduce the weight.
  • Remove mattresses from beds before moving them.
  • Keep the assembly instructions if you still have them.
  • Photograph each stage before taking furniture apart.
  • Bag and label all screws and fittings, then tape the bag to the largest panel.
  • Flag wardrobes, large beds and furniture that may not fit through doorways or round stairs.

Frequently asked questions

Can you move a flat pack wardrobe without taking it apart?

Sometimes, if the wardrobe is small and access is clear. Tall wardrobes usually need to come apart because long panels can weaken when carried assembled or tilted.

Will you rebuild my furniture at the new home?

Yes, when dismantling and reassembly have been agreed with us in writing beforehand. Tell us at the survey or quote stage so we can allow for the work.

What if I have lost the instructions?

Photos taken during dismantling and clearly labelled fittings help with rebuilding. Many manufacturers also publish their assembly instructions online.

Let us know which pieces need taking apart or building when you ask us for a quote. We agree the work in writing beforehand and include it in the quote, so our team arrives knowing what needs doing.

Opening times

Monday, Friday
08:00 to 17:00
Saturday
08:00 to 16:00
Sunday
08:00 to 16:00

We generally work seven days a week, get in touch to check availability for your date.

Opening hours

We're here when you need us

We generally work seven days a week across London. Tell us your date and we'll confirm availability, most moves can be arranged with very little notice.

Ready to book your move?